Comprehensive 20 Point System Checkup for your Central Vacuum System (recommended every 2 to 4 years). We service all brands and models!

Power Unit

1. Tighten intake, exhaust and line clamps
2. Inspect internal motor plate gasket for proper sealing
3. Inspect motor, relay transformer for any problems
4. Tighten dirt canister clamps if needed
5. Empty & clean dirt canister
6. Clean protective lint screen
7. Clean exterior of Power Unit and nearby pipe
8. Check operation of utility valve
9. Explain routine maintenance to homeowner
10. Ensure Warranty information is registered with the factory

Tube System

11. Check inlet valve switch for proper functionality (making sure system is activated when the inlet door is open, and the hose fits securely)
12. Check inlet valves for proper sealing
13. Tighten all inlet valve screws and level if needed
14. Run a pressure check on entire system and record sealed and working vacuum
15. Troubleshoot any leakage found

Accessories

16. Clean all standard tools
17. Disassemble turbine Power Brush; clean inside and out; inspect bearings; replace belt if needed (one Power Brush    included in maintenance package; $22.50 per each additional Power Brush)
18. Check hoses for obstructions
19. Ensure hose rack is installed and secure
20. Ensure hose sock is tied and securely in place